Brief introduction:
This equipment with many sets of fermentation tank system is composed of a set of connected, the control system consists of a set of computer software and many biological process controller (or a set of system controller) as the core of the work for equality experiment 3.5-7 l can of 50-3000 l stainless steel tank, also used in multi-stage pilot system.
The stainless steel starter can be widely used in the teaching, scientific research or biological experiments of all kinds of research institutes, universities and enterprises, and is one of the ideal tools for precision fermentation.
It is suitable for the determination or validation of the test simulation, the formulation of fermentation medium and the parameters of fermentation process.
 
Equipment composition:
This fermentation system consists of air pretreatment system, steam treatment system, training tank, thermostatic control system, electrical control system, and pipeline, valve and other supporting parts.
 
Features:
                                                                                                                                             
1. Integral structure, personalized design, compact structure, high concentration, convenient to use.
2, tanks design pressure 0.3 MPa, short-term sterilization pressure 0.13 MPa, or less fermentation when pressure is about 0.05 ~ 0.07 MPa, jacketed heat transfer temperature control, tank inside and outside surface polishing treatment, polishing precision Ra 0.4 or less, tanks and piping in sterilization, safe and reliable, cylinder parts with large Angle of view to observe the endoscopic, facilitate you observe state of fermentation tank.
3, the equipment is equipped with multiple fermentation tank is special standard interface, such as pH interface, DO the interface, temperature control interface, vaccination, defoaming alarm mouth mouth, meet to you for detection and control of fermentation parameters.
4. Using dc motor machinery stirring, stepless speed regulation, rotating speed: 50 ~ 1000rpm, using fermentative special mechanical seals, German technology, safe and reliable, reduce the chance of leakage and dyeing bacteria.
It can also be used for gas stirring.
5, second gear turbine disk agitator (flat leaves/oblique leaf/curved), the height is adjustable, fit the baffle, make material liquid mixed more evenly, is good for the dispersion of the gas and oxygen absorption.
6. The air filtration system adopts advanced membrane filtration technology, secondary double filtration, with precision of 0.01 mu m and the retention rate of 99.9999%, which greatly reduces the chance of dyeing bacteria.
More than 7, the fermentation system can also be the same with fermentor, parallel test, can achieve the same species in different temperature, rotational speed, the comparison of parameters such as pH, DO, really to sex is strong.
8. Adopt the stainless steel polishing line and valve which meet the requirements of microbial fermentation, and finish the surface polishing.
9, the basic control parameters include: temperature, speed, pH, DO, foam, fill material, such as flow, pressure, control points A, B, C, D, four specific content see the section automatic control.